Samsung M05 (SM-M055F) Flash File Download (Official Stock Rom)

Samsung M05 (SM-M055F) Flash File Download (Official Stock Rom) 

Samsung M05 SM-M055F Flash File (Stock Rom)

 If your Samsung Galaxy M05 (SM-M05F) is running slow, stuck on the boot logo screen (Hang on Logo), automatically restarting, or completely dead after a software glitch, you can fix it by flashing the official firmware. This original Samsung M05 SM-M05F Flash File (Stock ROM) replaces the corrupted system files with fresh, default system software.

Mobile technicians also use this official firmware to remove user screen locks, patterns, pin codes, and bypass Factory Reset Protection (FRP) alongside official repair utilities.

🛠️ Prerequisites Before Flashing Samsung M05

To ensure a safe installation without hard-bricking your smartphone, follow these safety instructions.

Battery Level Charge your Samsung M05 to at least 50% before connecting it to the computer.

Install Samsung USB Drivers Download and install the official Samsung USB drivers on your Windows desktop or laptop.

Backup Personal Data Flashing will wipe out everything (photos, contacts, accounts) from the phone's internal storage.

📥 Download Links: Samsung M05 Firmware & Tools

Download all the necessary files from the official high-speed mirrors below to initiate the process.

SM-M055F_INS_M055FXXS8CZE1 B (Android 16) One UI 8

SM-M055F_INS_M055FXXS6CZA1 B (Android 16)

SM-M055F_INS_M055FXXU5CYJ4 B (Android 16)

SM-M055F_INS_M055FXXS5BYJ1  V (Android 15)

SM-M055F_INS_M055FXXS4BYG7 V (Android 15)

SM_M055F_INS_M055FXXS4AYE4 U (Android 14)

SM_M055F_INS_M055FXXS3AXL1 U (Android 14)

SM-M055F_INS_M055FXXS2AXJ1  U (Android 14)

Samsung Odin Flash Tool Latest 2026-2027

Samsung MTK Qualcomm USB Driver

💻 How to Flash Samsung Galaxy M05 Using Odin Tool

Follow this easy step-by-step guide to load the software on your device.

 1: Extract the Packages

Download the firmware file and the Odin tool zip file on your PC. Extract both archives using WinRAR or 7-Zip onto your desktop.

 2: Run Odin Tool

Open the extracted Odin folder, right-click on Odin3.exe, and select "Run as Administrator."

 3: Load the Firmware Files (4-File / 5-File ROM)

Inside the Odin tool interface, click on the respective buttons and upload the specific firmware files from your extracted stock ROM folder.

Click BL and select the file starting with BL_...

Click AP and select the file starting with AP_... (Note: This file is large and may take a minute to load).

Click CP and select the file starting with CP_...

Click CSC and select the file starting with CSC_... (Do not select HOME_CSC if you want a complete clean flash).

 4: Boot Samsung M05 into Downloading Mode

Turn off your Samsung Galaxy M05 phone completely. Press and hold both Volume Up + Volume Down buttons simultaneously. While holding the buttons, connect the phone to your computer using a premium USB data cable. Release the buttons when you see a blue warning screen. Press the Volume Up button once to enter the official Downloading Mode.

 5: Start the Flashing Process

Look back at the Odin screen on your computer. The box under ID:COM should turn blue or light yellow, displaying a COM port number (e.g., 0:[COM3]). This means your device is connected successfully.

Now, click the Start button at the bottom. The process will begin, taking around 5 to 8 minutes. Once finished, a green "PASS" notification will appear, and your phone will reboot automatically into standard system setup!

❓ Frequently Asked Questions (FAQs)

1. What should I do if Odin gets stuck at "Setup Connection"?

If Odin gets stuck at the start sequence, it means the computer is unable to build a clean connection path. Unplug the cable, close Odin, restart the phone back into Download Mode, change the USB port on your PC, and try running it again.

2. Can I use this firmware file for other Samsung M-series models?

No! This firmware file is uniquely engineered for Samsung Galaxy M05 (SM-M05F). Attempting to force-flash this file on any other model can permanently hard-brick or damage the smartphone's motherboard.

3. Is the Odin Flash Tool completely free?

Yes, Odin is an official leaked flashing deployment utility from Samsung service binaries and is 100% free to use for maintenance purposes.

📁 Join Us on Telegram (Shri Telecom) Click Here

👤 Join Us on Facebook Page (Shri Telecom) Click Here

🎥 Subscribe Now Us on YouTube (Shri Telecom) Click Here


 

Previous
Next Post »